High precision analysis of an embryonic extensional fault-related fold using 3D orthorectified virtual outcrops: The viewpoint importance in structural geology     

《Journal of Structural Geology》2016

Image-based 3D modeling has recently opened the way to the use of virtual outcrop models in geology. An intriguing application of this method involves the production of orthorectified images of outcrops using almost any user-defined point of view, so that photorealistic cross-sections suitable for numerous geological purposes and measurements can be easily generated. These purposes include the accurate quantitative analysis of fault-fold relationships starting from imperfectly oriented and partly inaccessible real outcrops. We applied the method of image-based 3D modeling and orthorectification to a case study from the northern Apennines, Italy, where an incipient extensional fault affecting well-layered limestones is exposed on a 10-m-high barely accessible cliff. Through a few simple steps, we constructed a high-quality image-based 3D model of the outcrop. In the model, we made a series of measurements including fault and bedding attitudes, which allowed us to derive the bedding-fault intersection direction. We then used this direction as viewpoint to obtain a distortion-free photorealistic cross-section, on which we measured bed dips and thicknesses as well as fault stratigraphic separations. These measurements allowed us to identify a slight difference (i.e. only 0.5°) between the hangingwall and footwall cutoff angles. We show that the hangingwall strain required to compensate the upward-decreasing displacement of the fault was accommodated by this 0.5° rotation (i.e. folding) and coeval 0.8% thickening of strata in the hangingwall relatively to footwall strata. This evidence is consistent with trishear fault-propagation folding. Our results emphasize the viewpoint importance in structural geology and therefore the potential of using orthorectified virtual outcrops.  相似文献   

集合卡尔曼滤波同化中雷达位置的敏感性研究     

乔小湜  闵锦忠  王世璋 《气象学报》2016,74(5):796-814

针对对流尺度集合卡尔曼滤波（EnKF）雷达资料同化中雷达位置对同化的影响进行研究。为了考察强对流出现在雷达不同方位时集合卡尔曼滤波同化雷达资料的能力,以一个理想风暴为例,设计了8个均匀分布在模拟区域周围的模拟雷达进行试验。单雷达同化试验中,初期同化对雷达位置较敏感,而十几个循环后对雷达方位的敏感性降低。造成初期同化效果较差的雷达观测位于模拟区域正南和正北方向,这两部雷达与模拟区域中心的连线垂直于风暴移动方向（即环境气流的方向）。双雷达试验的结果表明,正东、正南、正西和正北方向的雷达组合观测会使同化初期误差较大,这说明并不是所有与风暴连线成90°的雷达组合都能在短时同化中得到合理的分析结果,还需要都处于模拟区域对角线上（即与环境气流成45°夹角）,同化效果才较好。短时同化后的确定性预报结果表明,较大分析误差也会导致较大预报误差。这些分析误差主要是由于同化初期不准确的集合平均场驱动出的不合理的背景误差协方差造成的。当背景场随着同化循环得到改进后,驱动出的合理的背景误差协方差使得不同位置雷达同化造成的差异逐步减小。基于上述结果,引入迭代集合均方根滤波（iEnSRF）算法,结果显示使用该算法后,雷达位置对同化效果的影响减小,同化不同位置的雷达资料均能有效降低分析和预报误差。   相似文献   

自动气象观测数据的质量控制   总被引：1，自引：1，他引：0  

郁珍艳  吴利红  高大伟  李正泉  樊高峰 《气象科学》2016,36(5):703-708

精细化气候变化分析及气候预测服务亟待发展,对高分辨率优质量的气候资料需求不断增长。本文利用缺测率、对比差值、空间一致性、粗差率、一致率5个指标对2009—2014年浙江省2 209个自动站温度数据进行评估分析,运用开放式可调整的评分标准,选取数据质量稳定可靠的站点,满足气候研究与业务的发展需求。共取得91个一级可用站,499个二级可用站,363个三级可用站,一级站主要分布于宁波和嘉兴地区,二级和三级站在各地都有较均匀的分布。在全省气候统计分析中,可以根据需求利用可用站。此外,有可用自动站参与的温度分布图完美呈现了地形对温度的影响,也使城市化发展突显出来,精细化的气候分析能更有效的为高山地区耕种制度及城市建设与规划提供科学依据。  相似文献   

EnSRF雷达资料同化在一次飑线过程中的应用研究   总被引：3，自引：1，他引：2  

高士博  闵锦忠  黄丹莲 《大气科学》2016,40(6):1127-1142

本文利用包含复杂冰相微物理过程的WRF（Weather Research and Forecasting）模式,针对2007年4月23日发生在我国华南地区的一次典型飑线天气过程,分别进行了确定性预报和集合预报试验,发现确定性预报能大致捕捉到飑线系统的发生发展过程,但对飑线后部的层云区模拟效果较差。集合预报能够有效地减少模式的不确定性,大部分集合成员对飑线的模拟效果优于确定性预报。进一步将集合预报得到的40个成员作为背景场,采用EnSRF（Ensemble Square Root Filter）同化多普勒天气雷达资料,并将分析得到的集合作为初始场进行集合预报,通过与未同化雷达资料的集合对比,考察了EnSRF同化多部雷达资料对飑线系统的影响。结果表明:EnSRF雷达资料同化增加了模式初始场的中小尺度信息,大部分集合成员的分析场能够较准确地再现飑线的热力场、动力场和微物理场的细致特征,并且模拟出飑线后部的层云结构。通过对EnSRF分析的集合进行模拟发现,大部分集合成员较未同化雷达资料时模拟效果有明显改善。同化后的集合预报ETS（Equitable Threat Score）评分最高,其次是未同化的集合预报,确定性预报的最低。  相似文献   

中国东部夏季暴雨的年代际跃变及其大尺度环流背景   总被引：4，自引：0，他引：4  

陈栋  陈际龙  黄荣辉  刘永 《大气科学》2016,40(3):581-590

本文利用1960~2011年中国东部地面测站的逐日降水资料和JRA-55再分析资料探讨了夏季暴雨分布的年代际跃变及其相关联的大尺度环流异常特征。基于暴雨频数和占比(夏季暴雨占比是指5~8月暴雨降水量对总降水量的贡献百分比)的分析结果表明:中国东部夏季暴雨分布在20世纪70年代末和90年代初经历两次反相的经向"三极子"跃变。中国东部夏季暴雨的年代际演变过程可分为三个时段:1960~1979年为华南和华北暴雨偏多、江淮流域暴雨偏少的经向"三极子"分布;1980~1991年为南方和华北暴雨偏少、江淮流域暴雨偏多的经向三极子"分布;1992~2011年为南方暴雨显著偏多、华北暴雨持续偏少,逐渐形成经向"偶极子"分布,并导致近十多年我国夏季"南涝北旱"的整体格局。1970年代末(1990年代初)跃变相关联的大尺度环流异常配置:东亚夏季风的减弱(增强),西太平洋副高的增强西伸但南撤(北抬),南亚高压的减弱南缩(增强东扩),以及蒙古高原中低层的气旋式(反气旋式)环流异常。与此同时,低层局地环流也发生调整:华北和黄淮地区以及华南和江南地区均为反气旋式(气旋式)环流异常,而江淮流域和四川盆地受控于风场切变式辐合(辐散)异常;涡度场发生相应变化,南北方大部分地区的负(正)涡度异常不(有)利于低涡的发展,而江淮流域和四川盆地的正(负)涡度异常有(不)利于低涡的发展,进而引发江南和华南暴雨减少(增加)、江淮流域和四川盆地暴雨增加(减少)、黄淮和华北暴雨减少(增加)的经向"三极子"跃变。  相似文献   

Estimating winter wheat biomass by assimilating leaf area index derived from fusion of Landsat-8 and MODIS data     

《International Journal of Applied Earth Observation and Geoinformation》2016

A sufficient number of satellite acquisitions in a growing season are essential for deriving agronomic indicators, such as green leaf area index (GLAI), to be assimilated into crop models for crop productivity estimation. However, for most high resolution orbital optical satellites, it is often difficult to obtain images frequently due to their long revisit cycles and unfavorable weather conditions. Data fusion algorithms, such as the Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM) and the Enhanced STARFM (ESTARFM), have been developed to generate synthetic data with high spatial and temporal resolution to address this issue. In this study, we evaluated the approach of assimilating GLAI into the Simple Algorithm for Yield Estimation model (SAFY) for winter wheat biomass estimation. GLAI was estimated using the two-band Enhanced Vegetation Index (EVI2) derived from data acquired by the Operational Land Imager (OLI) onboard the Landsat-8 and a fusion dataset generated by blending the Moderate-Resolution Imaging Spectroradiometer (MODIS) data and the OLI data using the STARFM and ESTARFM models. The fusion dataset had the temporal resolution of the MODIS data and the spatial resolution of the OLI data. Key parameters of the SAFY model were optimised through assimilation of the estimated GLAI into the crop model using the Shuffled Complex Evolution-University of Arizona (SCE-UA) algorithm. A good agreement was achieved between the estimated and field measured biomass by assimilating the GLAI derived from the OLI data (GLAI_L) alone (R² = 0.77 and RMSE = 231 g m⁻²). Assimilation of GLAI derived from the fusion dataset (GLAI_F) resulted in a R² of 0.71 and RMSE of 193 g m⁻² while assimilating the combination of GLAI_L and GLAI_F led to further improvements (R² = 0.76 and RMSE = 176 g m⁻²). Our results demonstrated the potential of using the fusion algorithms to improve crop growth monitoring and crop productivity estimation when the number of high resolution remote sensing data acquisitions is limited.  相似文献   

Predictive geochemical mapping using environmental correlation     

《Applied Geochemistry》2016

The distribution of chemical elements at and near the Earth's surface, the so-called critical zone, is complex and reflects the geochemistry and mineralogy of the original substrate modified by environmental factors that include physical, chemical and biological processes over time.Geochemical data typically is illustrated in the form of plan view maps or vertical cross-sections, where the composition of regolith, soil, bedrock or any other material is represented. These are primarily point observations that frequently are interpolated to produce rasters of element distributions. Here we propose the application of environmental or covariate regression modelling to predict and better understand the controls on major and trace element geochemistry within the regolith. Available environmental covariate datasets (raster or vector) representing factors influencing regolith or soil composition are intersected with the geochemical point data in a spatial statistical correlation model to develop a system of multiple linear correlations. The spatial resolution of the environmental covariates, which typically is much finer (e.g. ∼90 m pixel) than that of geochemical surveys (e.g. 1 sample per 10-10,000 km²), carries over to the predictions. Therefore the derived predictive models of element concentrations take the form of continuous geochemical landscape representations that are potentially much more informative than geostatistical interpolations.Environmental correlation is applied to the Sir Samuel 1:250,000 scale map sheet in Western Australia to produce distribution models of individual elements describing the geochemical composition of the regolith and exposed bedrock. As an example we model the distribution of two elements – chromium and sodium. We show that the environmental correlation approach generates high resolution predictive maps that are statistically more accurate and effective than ordinary kriging and inverse distance weighting interpolation methods. Furthermore, insights can be gained into the landscape processes controlling element concentration, distribution and mobility from analysis of the covariates used in the model. This modelling approach can be extended to groups of elements (indices), element ratios, isotopes or mineralogy over a range of scales and in a variety of environments.  相似文献   

A note on “Origin of components in Chilean thermal waters” by     

《Journal of South American Earth Sciences》2016

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.  相似文献   

月球东海盆地综合解析与撞击初始条件的研究     

刘敬稳  刘建忠  郭弟均  籍进柱  王庆龙  李世杰 《岩石学报》2016,32(1):135-143

东海是月球上最年轻的多环撞击盆地,关于其形成机制的研究很多,但成果大都基于正撞击的机制提出的,虽然有部分学者提出东海是斜撞击的,但缺乏具体撞击参数。本文通过多源数据融合,综合分析LRO影像数据、LOLA地形数据、M~3高光谱数据和IIM高光谱数据,对东海地区的地貌特征、物质成分进行了较为系统的解译,发现在东海中央熔融区存在一条与东海撞击方向垂直的中央隆起区域(中央隆起线),其也是中央熔融区粗糙部分与光滑部分的分界线,结合撞击坑成坑理论,认为其可能是撞击过程冲击波作用引起的堆叠作用形成的。同时利用GRAIL数据及对该地区的重力异常的成因进行了分析,认为异常是由于压强、温度及岩石粘度的改变引起局部莫霍面抬升和中央熔融物的形成而出现的,进而估算出熔融物占盆地内物质的25%,约为1.1×10~6km~3。同时,对GRAIL数据的剖面分析结果也支持了本文的斜撞击理论。最后,综合多方面的信息和撞击理论获取东海盆地构造分布图,并根据中央隆起线、溅射物及线性构造的分布特征等,提出东海盆地理论上是由一直径在50~100km的撞击体以10~30km/s的速度自东偏北约20°~30°方向以20°~30°的角度斜撞击月表而形成的。这可为研究更早期的月球撞击坑提供理论参考。  相似文献   

Spatial data fusion in Spatial Data Infrastructures using Linked Data     

Stefan Wiemann  Lars Bernard 《International journal of geographical information science》2016,30(4):613-636

  相似文献